Cart is empty
A low-build sealer used as the initial application of Auto Air Colors
Has excellent coverage and adhesion to primers & prepared surfaces.
Works best with a 0.5mm airbrush operated at 45+ PSI or a 1.2mm tip-sized spray gun operated at 40 PSI.
Tint with 4200 Series Semi-Opaque or Transparent Colours to create a colour-keyed sealer base to improve coverage of colours. The mix ratio is not specific. Mix colours approx. 25% per volume to tint sealer.
Dry-sand with 600 – 800 grit paper to create a smoother surface before applying colours.
Excellent adhesion direct to urethane, epoxy and lacquer primers. Excellent adhesion to existing finishes, prepare by scuffing with 600 grit. Excellent adhesion to prepared substrates; aluminum, fiber-glass, glass, wood, vinyl and ceramics.
Plastics - use an adhesion promoter first. Bare, untreated metal – apply a DTM etch-primer follwed by 4001 Sealer White or 4002 Sealer Dark.
Intended for application with a spray gun or large tip-sized airbrush.
Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: 10% per volume with 4011 Flash Reducer
Airbrush: 30% per volume or more with 4011 Flash Reducer